PVC-U ASTM PIPES & Fittings
1. COUPLER
This component is used to connect or join two lengths of pipes together.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | 65 | 80 | 100 | 150 | |
| 200 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | 2½” | 3” | 4” | 6″ | |
| 8″ |
2. ELBOW 90°
This component is used to change the direction of a pipeline by creating a 90-degree turn.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | 65 | 80 | 100 | 150 | |
| 200 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | 2½” | 3” | 4” | 6″ | |
| 6″ |
3. ELBOW 90° – THREADED
This component is used to give a 90-degree turn to a pipeline and connect male threaded pipes and fittings together.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | |||||
4. ELBOW 90° – BRASS INSERT
This component is used to connect male threaded CP/Metal fittings, such as taps and showers, to a pipeline.
| Size(mm) | 15 | 20 | 25 |
| Size(Inch) | ½” | ¾” | 1” |
5. ELBOW 45°
This component is used to give a 45° turn to a pipeline.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | 65 | 80 | 100 | 150 | |
| 200 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | 2½” | 3” | 4” | 6″ | |
| 8″ |
6. TEE
This component is used to create a bypass or a service line from a main line.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | 65 | 80 | 100 | 150 | |
| 200 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | 2½” | 3” | 4” | 6″ | |
| 8″ |
7. CROSS TEE
This component is used to create a double bypass or service line from a main line.
| Size(mm) | 15 | 20 | 25 |
| Size(Inch) | ½” | ¾” | 1” |
8. TEE – THREADED
This component is used to create a bypass or service line from a main line.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | |||||
9. TEE – BRASS INSERT
This component is used to connect a male threaded CP/metal fitting, such as taps, showers, etc., to a pipeline.
| Size(mm) | 15 | 20 | 25 |
| Size(Inch) | ½” | ¾” | 1” |
10. END CAP
This component is used to plug the end of a pipeline.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | 65 | 80 | 100 | 150 | |
| 200 | |||||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | 2½” | 3” | 4” | 6″ | |
| 8” |
11. THREADED END PLUG
This component is used as a threaded end plug for pressure testing.
| Size(mm) | 15 | 20 |
| Size(Inch) | ½” | ¾” |
12. MALE THREADED ADAPTER (M.T.A.)
This component is used to connect female threaded fittings to a pipeline.
| Size(mm) | 15 | 20 | 25 | 32 | 40 |
| 50 | 65 | 80 | 100 | ||
| Size(Inch) | ½” | ¾” | 1” | 1¼” | 1½” |
| 2” | 2½” | 3” | 4” | ||
13. MALE THREADED ADAPTER (M.T.A.)- BRASS INSERT
This component is used to connect female threaded CP/metal fittings such as taps, showers, etc., to a pipeline.
14. FEMALE THREADED ADAPTER (F.T.A.)
This component is used to connect male threaded fittings to a pipeline.
15. FEMALE THREADED ADAPTER (F.T.A.)-BRASS INSERT
This component is used to connect male threaded CP/metal fittings, such as taps, showers, etc., to a pipeline.
16. UNION
This component is designed to allow quick and convenient disconnection of pipes for maintenance or fixture replacement purposes.
17. STEP OVER BEND
This component is used to cross over an existing pipeline, allowing for the passage of another pipeline or conduit.
18. TANK NIPPLE
This component is used to connect the pipeline to a tank, enabling the flow of liquids or gases into or out of the tank.
19. TANK NIPPLE – SOCKET END
This component, called a tank nipple, is used to connect the pipeline directly to a tank. It has a socket at one end that allows for easy and direct connection with the pipe. This enables the flow of liquids or gases between the tank and the pipeline.
20. PIPE CLIP
To fix and secure the pipeline to a wall or a flat surface.
21. POWDER COATED METAL CLAMP FOR ASTM PIPE
To fix and secure the pipeline to a wall or a flat surface
22. COMPACT BALL VALVE
The purpose of a quick-disconnect fitting is to allow a rapid and convenient disconnection of the water supply. These fittings enable easy removal or detachment of pipes or hoses without the need for special tools or extensive manual effort. Quick-disconnect fittings are especially useful in situations where frequent disconnection and reconnection of water supply lines are required, such as in irrigation systems or temporary connections.
23. UPVC BALL VALVE
The quick-disconnect fitting serves the purpose of enabling a rapid and convenient disconnection of the water supply. This type of fitting allows for easy detachment of pipes or hoses without the need for specialized tools or extensive manual effort. It is particularly useful in situations where frequent disconnection and reconnection of water supply lines are required, providing a simple and efficient solution for various applications such as irrigation systems or temporary connections.
24. BALL VALVE ACCESSORIES – BLUE HANDLE
To use for on/off movement of Ball Valve
25. REDUCER
A reducer is used to reduce the size of the main pipeline.
26. REDUCING BUSH
A reducer is used to reduce the internal diameter of fittings.
27. REDUCING ELBOW 90°
A 90-degree elbow reducer is used to give a sharp 90-degree turn in a pipeline and connect it with a reduced pipeline.
28. REDUCING TEE
A reducing tee is used to take a reducing bypass or service line from the main line in a pipeline system.
29. REDUCING ELBOW 90° – BRASS INSERT
A male threaded adapter is used to connect male threaded CP/metal fittings, such as taps, showers, etc.,
30. REDUCING TEE – BRASS INSERT
A male threaded adapter is used to connect male threaded CP/metal fittings, such as taps, showers, etc.,
31. REDUCING MALE THREADED ADAPTER (M.T.A.)
A female threaded adapter is used to connect female threaded fittings to a pipeline.
32. REDUCING MALE THREADED ADAPTER (M.T.A.) – BRASS INSERT
A female threaded connector is used to connect female threaded CP/metal fittings, such as taps, showers, etc., to a pipeline.
33. REDUCING FEMALE THREADED ADAPTER (F.T.A.) – BRASS INSERT
A male threaded connector is used to connect male threaded CP/metal fittings, such as taps, showers, etc., to a pipeline.
34. FAUCET VALVE
A quick-disconnect coupling is used to allow quick and convenient disconnection of the water supply.
35. HEX NIPPLE
To connect two female threaded fittings on either side, a male threaded connector is used.
36. NON RETURN VALVE
To allow or control the flow of water in only one direction, a check valve is used.
